Home | Troubleshooting |  Quick Setup  |  Cisco How to  |  Data Recovery  |  Forums   | Blog | IT Exam Practice | Services  | About Us | Chicagotech MVP  | Search  | Contact Us  |                 

 

 

  

How to Add Static Routes on SonicWALL

1. Under Content Security Manager’s management interface, in the left-navigation menu, click Network and then click Interfaces.

2. In the Interfaces page, click Add in the Routing Table section.

3. In the Add Route window, enter the beginning IP address of the IP address range to Internet gateway belongs in the IP Address From field.

4. Enter the ending IP address of the IP address in the IP Address To field.

5. Enter the IP address of the gateway device to Internet gateway are attached in the Gateway IP field.

6. Select Internal (X0) or External (X1) from the Interface menu.

7. Click OK. The static route entry is added to the Routing Table.

Now, The Routing Table should display the list of destinations that the IP software maintains on each host and router.

 

 


 

 

Hit Counter   This web is provided "AS IS" with no warranties.
Copyright © 2002-2018 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.