Home | Troubleshooting |  Quick Setup  |  Cisco How to  |  Data Recovery  |  Forums   | Blog | IT Exam Practice | Services  | About Us | Chicagotech MVP  | Search  | Contact Us  |                  Laptop for rent: $35 per day plus $10 for additional day

rental
 

 

Case Study - Both VPN sites are using the same IP range

Situation: Small company enables RRAS on their windows server 2003 for some home users to access the office LAN. Normally, the VPN works fine.

Problem: The office LAN uses 192.168.0.0/24 while the president of the company uses the same IP range at home. He doesn't wants to change the IP range at home. Since he is using the same IP range of the office LAN, any traffics to 192.168.0.x from the VPN client will remain in the local subnet and never pass through the VPN.

Resolution: Since he only needs to access the home directory of the server which is using IP 192.168.0.11 while his computer IP is 192.168.0.2, we add a persistent route to point to 192.168.0.11. So that he can access the remote server through the special route.
 

Post your questions, comments, feedbacks and suggestions

Contact a consultant

Related Topics

VPN Case Study
VPN Case Study. Backup data via VPN · Can’t access the server using RDC after enabling VPN · Can't browse over VPN because the inside NIC is disabled ...

Computer browser over VPN
Routing how to

Troubleshooting VPN Issues


 

 


 

 

Hit Counter   This web is provided "AS IS" with no warranties.
Copyright © 2002-2018 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.