Home | Troubleshooting |  Quick Setup  |  Cisco How to  |  Data Recovery  |  Forums   | Blog | IT Exam Practice | Services  | About Us | Chicagotech MVP  | Search  | Contact Us  |                  Laptop for rent: $35 per day plus $10 for additional day

rental
 

 

How to install ISA Server

  1. Run setup from ISA CD.
  2. In Microsoft ISA Server Setup, click Install ISA Server.
  3. Oon the Welcome page, click Next.
  4. Click I accept the terms in the license agreement, and then click Next.
  5. Type your customer details, and then click Next.
  6. Select one of options: Typical Installation, Full Installation, or Custom Installation.
  7. Click Next.
  8. Configure the Internal network. Follow these steps:
    1. Click Add.
    2. Click Select Network Adapter.
    3. Select Add address ranges based on the Windows Routing Table.
    4. Select one or more of the adapters that are connected to the Internal network. These addresses will be included in the Internal network that is defined by default for ISA Server.
    5. Clear the selection of Add the following private IP ranges, unless you want to add those ranges to your Internal network.
    6. Click OK. Read the Setup Message, click OK, click OK again to finish the Internal network configuration, and then click Next.
  9. On the Firewall Client Connection Settings page, select whether you want to allow nonencrypted connections between Firewall clients and the ISA Server computer. The ISA Server 2004 Firewall Client software uses encryption, but older versions do not. Also, some versions of Windows do not support encryption. You can select the following:
    • Allow non-encrypted Firewall client connections. To allow Firewall clients running on versions of Windows that do not support encryption to connect to the ISA Server computer.
    • Allow Firewall clients running earlier versions of the Firewall client software to connect to ISA Server. This option is available only if the first option is selected.
  10. On the Services page, review the list of services that will be stopped or disabled during installation of ISA Server. To continue the installation, click Next.
  11. Click Install.
  12. After the installation is complete, if you want to invoke ISA Server Management immediately, select the Invoke ISA Management check box, and then click Finish.

Post your questions, comments, feedbacks and suggestions

Contact a consultant

Related Topics


 

 


 

 

Hit Counter   This web is provided "AS IS" with no warranties.
Copyright © 2002-2018 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.