How to configure EDIMAX AP

  1. Access EDIMAX AP by opening a web browser and entering the access point’s default IP address “http://192.168.2.1” into the URL bar.
  2. default username is admin and the default password is 1234.
  3. Follow the wizard to setup AP.
  4. Configure AP Mode: There are 6 AP mode. They are:

1) Select “Basic Settings” from the menu on the left side of the screen.

2) Open the drop down menu labeled “Mode” and select one Mode from the 6 available modes:

AP
Station-Infrastructure
AP Bridge-Point to Point
AP Bridge-Point to Multi-Point
AP Bridge-WDS
Universal Repeater

This is the screenshot of Station-Infrastructure.

Note: It is recommend to use “Select Site Survey”.

Published by

Bob Lin

Bob Lin, Chicagotech-MVP, MCSE & CNE Data recovery, Windows OS Recovery, Networking, and Computer Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com