|
|
|||
Home | Troubleshooting | Quick Setup | Cisco How to | Data Recovery | Forums | Blog | IT Exam Practice | Services | About Us | Chicagotech MVP | Search | Contact Us | |
|
How to setup IP on
HP BladeSystem’s Enclosure To
active Onboard Administrator for configuring
HP BladeSystem, you need to assign an IP
address to the OA/iLO. You can use a DHCP service
on your network to assign a dynamic IP address or configure a static IP
address using the Insight Note: 1.
If you do not want to use Enclosure Bay IP addressing, you may connect to
each
server blade’s front SUV port
(using the SUV cable shipped with every enclosure) and configure the iLO IP
address manually during BIOS POST. 2. You
can also sue your laptop with the same subnet settings to connect to the OA
directly without connecting to the network. Post your questions, comments, feedbacks and suggestions Related Topics
|
|
|
This web is provided "AS IS" with no warranties.
Copyright © 2002-2018
ChicagoTech.net,
All rights reserved. Unauthorized reproduction forbidden.