|
|
|||
Home | Troubleshooting | Quick Setup | Cisco How to | Data Recovery | Forums | Blog | IT Exam Practice | Services | About Us | Chicagotech MVP | Search | Contact Us | |
|
HP Blade server NIC mapping and configuration
Case 1: In this case, we have HP Half Blade Server in Bay 9 without Mezzanine card. That means we have only two NICs. Note: if we want to add more NICs, we need to add Mezzanine card and two more internal switches.
From the screenshot, we can see that both NICs are using port 9 in both interconnect Bay 1 and 2.
Here are our configuration:
In Bay1, the NIC is connecting to default VLAN which is VLAN 1.
interface GigabitEthernet0/9
In Bay2, the NIC is connecting to VLAN 800 that is our SAN
interface GigabitEthernet0/9
Post your questions, comments, feedbacks and suggestions Related Topics
|
|
|
This web is provided "AS IS" with no warranties.
Copyright © 2002-2018
ChicagoTech.net,
All rights reserved. Unauthorized reproduction forbidden.