How to manage HP MSL Storage using GUI

How to manage HP MSL Storage using GUI

1. Plug the cable to the Ethernet port on the HP MSL Storage.

2. Get IP address from DHCP or assign the IP address using control pane in the front of the HP MSL Storage.

3. Default, the administrator password is blank.

4. After login, click Identity to find Library Name, Drive Status, Serial Number, Firmware, IP address, Mac Address, Library Mode.

5. To check the Status, click Status, you will have 3 options: Library, Drive and Inventory.

6. To configure the Library, click Configuration>System, you can change the Library Name, Library Mode, Mailslot Configuration, enable or disable Admin password required.

7. To change the drive SCSI ID, go to Configuration>Drive.

8. To configure network settings, click Network under Configuration.

9. In the Password, you can setup Administrator password. It must be numbers.

10. In the Configuration, you can also setup Date/Time, Email Notification and Restore Defaults.

11. In the Operation tab, you can move, inventory the tapes, and release Magazines.

12. In the Support tab, you can diagnose the library, check firmware, reboot the library, check teh library logs, clean drive.

Post your questions, comments, feedbacks and suggestions

Contact a consultant