Error 733:
the PPP control protocol for this network protocol is not available on
the server.
Resolution:
1) Ensure that the TCP/IP protocol is installed on your
RAS server and that the TCP/IP protocol is selected in the Server
Settings of the Network Configuration option of the Remote Access Setup
dialog.
2) If you have the "Use DHCP to assign remote TCP/IP client addresses"
option selected for the TCP/IP protocol in the RAS Server Settings, then
ensure that you have installed DHCP and that it is not disabled.
3) Ensure that all of the bindings for TCP/IP are enabled in the
Bindings tab of the Network dialog of the Control Panel. Be sure to
inspect the TCP/IP Protocol and WINS Client (TCP/IP) bindings for all adapters, all protocols, and all services.
If the TCP/IP bindings are corrupt, you may have to reinstall TCP/IP and
or RAS in order to clean up the bindings.
Post your questions, comments, feedbacks and suggestions
Related Topics
VPN error code
VPN Browsing Issues
VPN Logon
Issues
VPN Name Resolution
VPN as
Router
VPN Routing Issues
VPN
TCP/IP Settings
Ports
for VPN
VPN/PPTP
VPN Slow
Issues
Previous Page Next Page
|