|
|
|||
Home | Troubleshooting | Quick Setup | Cisco How to | Data Recovery | Forums | Blog | IT Exam Practice | Services | About Us | Chicagotech MVP | Search | Contact Us | |
|
How to Configure Route to Router VPN in LinkSys RV016 Router
1. Login the router using web utility, for example, http://192.168.10.1. 2. Click on VPN and select Gateway to Gateway. 3. Assign Tunnel No, Tunnel name, Interface and check Enable. 4. In Local Group Setup, select IP only for Local Security Gateway, type router public IP address for the gateway IP address, LAN IP address and subnet. 5. In the Remote Group Setup, select IP only as Remote Security Gateway, assign remote VPN router public IP for remote gateway, and remote LAN IP and subnet. 6. Assign the same settings of remote VPN in IPSec Setup. Make sure both sites are match.
7. After save the settings and if the other site has setup the correct settings, the VPN Summery should display as the following.
8. To check the connection status, click Details, To modify the settings, click Edit.
Post your questions, comments, feedbacks and suggestions Related Topics Overview of LinkSys RV016 VPN
Router How to configure a VPN between 3com and LinksysHow to Configure port forwarding in LinkSys RV016 Router How to Configure Route to Router
VPN in LinkSys RV016 Router Linksys router doesn't functionLinksys Router to router VPNrouters
windows 2003 RRAS VPN + Linksys ...
VPN Connection through LinkSys ...
|
|
This web is provided "AS IS" with no warranties.
Copyright © 2002-2018
ChicagoTech.net,
All rights reserved. Unauthorized reproduction forbidden.