Home | Troubleshooting |  Quick Setup  |  Cisco How to  |  Data Recovery  |  Forums   | Blog | IT Exam Practice | Services  | About Us | Chicagotech MVP  | Search  | Contact Us  |                 

 

 

How to setup IPSec Filter and assign IP - From local computer to remote LAN

Choose A specific IP address as source address and enter the Windows 2000 IP address, 10.0.0.11 as IP Address and 255.255.255.255 as subnet mask. Choose A specific IP Subnet as Destination address and enter the Office LAN IP address and subnet mask, 192.168.0.0 and 255.255.255.0.. Uncheck the box for Mirrored.


Post your questions, comments, feedbacks and suggestions

Contact a consultant

Related Topics

How to setup VPN between FVS318 and windows 2000
  
Parameters Recommended for FVS318 VPN (Figure)
  
Configuring the Client-to-Gateway VPN Tunnel on the FVS318v3 (Figure)
   How to configure Windows IPSec

   Difference of Tunnel Setting between local to remote and remote to local
How to check the VPN status on FVS318
How to test Netgear ProSafe VPN connection

Previous Page   Next Page
 

 


 

 

Hit Counter   This web is provided "AS IS" with no warranties.
Copyright © 2002-2018 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.