Home | Troubleshooting |  Quick Setup  |  Cisco How to  |  Data Recovery  |  Forums   | Blog | IT Exam Practice | Services  | About Us | Chicagotech MVP  | Search  | Contact Us  |                 

 

 

To enable the DHCP Relay Agent on a router interface

 

  1. Open Routing and Remote Access from Administrative Tools.
  2. Navigate
  3. Routing and Remote Access/server name/IP Routing/DHCP Relay Agent.
  4. Click the interface you want to add, and then click OK.
  5. In the DHCP Relay Properties dialog box, on the General tab, verify that the Relay DHCP packets check box is selected.
  6. If needed, in Hop-count threshold and Boot threshold (seconds), click the arrows to modify the thresholds.

 

Post your questions, comments, feedbacks and suggestions

Contact a consultant

Related Topics

Considerations of setup DHCP on WAN or additional subnets
DHCP Considerations
How to add the DHCP Relay Agent in RRAS
How to configure Windows DHCP Scope
How to enable the DHCP Relay Agent on a router interface
How to export/import DHCP scopes
How to predefine a DHCP Option

 


 

 

Hit Counter   This web is provided "AS IS" with no warranties.
Copyright © 2002-2018 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.